Bentel Omnia 4 Especificaciones descargar pdf (Pagina 69)

Control menu

Control panel

The Control panel option opens a window (figure 37) for system monitor-

ing and control (via serial or modem).

Zones The Zones section shows the following data for each control panel zone.

Ø No. - Identifier number

Ø Description - description

Ø Partitions - the partitions the zone is assigned to

Ø Mem. - GREEN = no alarms memorized; RED = alarms memorized

Ø Al. - GREEN = Zone in standby status; RED = Zone in alarm

Ø Tam. - GREEN = Zone in standby status; RED = Tamper alarm

Ø Byp. - GREEN = Zone unbypassed; RED = Zone bypassed

To Bypass / Unbypass zones:

1. Enter a valid User code in the User Code field (the code must be enabled

for zone bypass, and also enabled on the partitions of the zones to be by-

passed / unbypassed).

2. Select OK.

3. Use the Byp./UnByp. check boxes to select the partitions to be bypassed /

unbypassed (box checked = Bypassed; box cleared = Unbypassed).

Only the zones of the disarmed partitions, controlled by the entered User

code, can be bypassed / unbypassed.

4) Select the Send button.

Outputs The Outputs section shows the status of the control panel outputs.

GREEN = Output in standby status; RED = Output activated

Trouble The Trouble section shows the detected trouble.

GREEN = No trouble; RED = Trouble

Partitions The Partitions section shows the following information for each partition.

Ø No. - partition identifier number

Ø Description - description

Ø Alarm - GREEN = Partition in standby status; RED = Partition in alarm

Ø Armed - GREEN = Partition disarmed; RED = Partition armed

PROGRAMMING FROM PC 69

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 111 112

Sin comentarios

Bentel Omnia 4 Especificaciones Pagina 69