Bentel Omnia 4 Especificaciones descargar pdf (Pagina 68)

Programming menu

The programmed parameters must be copied onto the corresponding con-

trol panel.

Local When this option is selected the Local connection will be used for data

Loading/Sending to / from the control panel.

Remote When this option is selected, the Remote connection via Modem will be ac-

tive. Therefore, the Active Remote connection will be used for data Load-

ing/Sending to / from the control panel.

Load This option loads the programmed parameters of the connected control

panel (via serial port or telephone). Loading takes approximately 2 minutes

in Local mode and 7 minutes in Remote mode.

The Installer Code PIN and the Date and hour will not be loaded (refer to

"Clock" paragraph).

Send This option downloads the current parameters onto the connected control

panel (via serial port or telephone). Downloading takes approximately 2

minutes in Local mode and 7 minutes in Remote mode.

The Installer Code PIN and the Date and hour will not be sent (refer to

"Clock" paragraph).

The Send and Load buttons (on the various pages) can send or load only

the data on the active page, therefore, data transfer times are considerably

less.

Figure 37 Panel Status window

68 Security System Control Panels Omnia8/4

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 111 112

Sin comentarios

Bentel Omnia 4 Especificaciones Pagina 68