Bentel Omnia 4 Especificaciones descargar pdf (Pagina 39)

The Control panel can manage up to 16 devices (key readers or keypads,

maximum 8 keypads including the one supplied), up to 128 digital keys

and an unlimited number of clone digital keys (clones of digital key 128).

The digital keys must be programmed via keypad, as per the instructions in

the "Digital key" paragraph. The following paragraphs describe the key

reader parameters.

RED spot

(corresponds to

the RED LED on

the key reader)

Use this row to assign the key reader to the partitions it must control (arm,

disarm, etc.). The numbers on the top row correspond to the partitions (1

through 4). YES / NO indicates the enabled / disabled status of the key

reader on the corresponding partition.

When the RED LED is ON and the digital key is extracted from the key

reader ----all the enabled partitions will be armed.

Double-click or select ENTER on the corresponding cell to toggle the

status.

AMBER spot

(corresponds to

the AMBER LED

on the key

reader)

Use this row for the Type A arming mode configuration. The numbers on

the top row correspond to the partitions (1 through 4).

When the AMBER LED is ON and digital key is extracted from the key

reader ----partitions with A will be armed, partitions with D will be dis-

armed. Double-click or select ENTER on the corresponding cell to toggle

the status.

GREEN spot

(corresponds to

the GREEN LED

on the key

reader)

Use this row for the Type B arming mode configuration. The numbers on

the top row correspond to the partitions (1 through 4).

When the GREEN LED is ON and the digital key is extracted from the key

reader ----partitions with A will be armed, partitions with D will be dis-

armed.

Double-click or select ENTER on the corresponding cell to toggle the

status.

PROGRAMMING 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 111 112

Sin comentarios

Bentel Omnia 4 Especificaciones Pagina 39