Bentel Omnia 4 Manual de usuario descargar pdf (Pagina 7)

BENTEL

USER MANUAL

[User Code 1] + [ ]+[ Zone Status ]+ [ OFF / ON ]+[ ]

1. Enter the [User Code 1] and press enter.

2. Then using up / down ( Refer Keypad Indicators Page 2 ),and [ Zone Status ],press enter.

3. Select the zone that needs to be bypassed ( using A or B Buton ), then press [ ON ] to

bypass,or press [ OFF ] to Unbypass.

4. Repeat step 3 to bypass other zones.

5. Press [ESC] key to exit the bypass mode.

Press [ ]

1. When the service indicator light on,that means got troubleshoot,press [ ] to view the

System fault on LCD Screen.

2. Press [ESC] key to exit.

Mains Fault

The Mains power supply to the Control Panel has

failed.If it is not a general Black-Out

BPI Fault

A BPI device has failed to respond ( Mising )

- Keypad Fault

Fuse Fault

Blown fuse

Battery Fault

The Control panel battery is not recharging properly

or is faulty

Battery Fault Z..

The Battery of a Wireless Zone Device has not been

charged properly or it is down completely or fault –

Contact your Installer.The Zone concerned will be

indicated after the “Z” (E.g “ Battery Fault Z03)

Tel. Line Fault

Telephone Line trouble

Default Codes

This Trouble condition will be present until a User

Code is programmed

WLS Fault

For Wireless systems, the Wireless Receiver is not

functioning properly

Wireless Jam

Wireless interference has been detected

Missing Device Z..

One or more of the Wireless Zone Devices is not

responding – Contact your Installer.The Zone

concerned will be indicated after “Z” ( E.g “Missing

Z03”

VIEW SYSTEM

TROUBLE

BYPASS / UN-BYPASS ZONE

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bentel Omnia 4 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bentel Omnia 4